This photo is of an SPR manufactured for a chemical company as part of a polymer synthesis system.

This photo is of the 3-A sanitary device for use on egg pasteurization and homogenization.

This photo of a ShockWave Power Reactor™ (SPR) was taken during installation at a chemical supply company.

This particular unit is referred to as a 32" SPR, which is made of stainless steel material and has a heat output capability up to 1,145,000 Btu/h.

This photo shows a second view of the unit above.  The SPR is just to the left of the electrical panel shown in the lower right corner.

This unit is used to concentrate batch chemicals fed from the large storage tanks shown in the left side of the photo.

The SPR in this photo is being used for the concentration of drilling fluid in the petroleum industry.

The SPR in this photo is going through our testing procedure, which is performed on all systems prior to shipping them to the customer.

This photo shows the SPR just prior to shipping it to the customer.

This particular unit is being used to make biodiesel.

The SPR to the right is now installed in a pulp and paper research institute in Europe.